Never attempt to disassemble a component until you have read and understood all recommended procedures. Never look directly into component ports or direct a pressurized air flow at anyone.

Never exceed recommended working air pressure and always wear safety glasses when working with air pressure.

Keep hands away from brake chamber push rods and brake adjusters they may apply as system pressure drops. Bleeding off system air pressure may cause the vehicle to roll. Always block the vehicle wheels to prevent a fore or aft roll. Stop engine when working under a vehicle. Refer to vehicle and suspension manufacturers instructions for location of the valve. PRE-INSTALLATION WARNINGS IMPORTANT: It is extremely important that the original equipment manufacturers specifications are followed when installing a new valve. The air filter in the Haldex Pressure Protection Valve is removable and can be cleaned or replaced, if necessary. Normal air system maintenance should be practiced. PERIODIC AIR CONTROL MAINTENANCE Drain all moisture from air reservoir at regular intervals.

NOTE: The Haldex EGP valve can be interchanged with other brands of height control valves. Lever arm and link assemblies can be purchased by ordering 48100267 from your Haldex Distributor. The integral dump valve is NOT sold separately and CAN NOT be interchanged on valves in the field. Refer to installation instructions herein for proper hook-up. The Haldex EGP can be used for right or left and long or short control arm applications. 10/04 GENERAL INFORMATION The Haldex EGP Height Control Valve (HCV) automatically adds air to, or exhausts air from air suspension to maintain a constant static design ride height. Type EGP Immediate Response Height Control Valve 元1186 (94100535) Rev.

Haldex electric solenoid valve